Timers-RLS2

Product Description

Products' brief
Design according to En60730
Switches "ON" and "OFF"automatically following a pre-determined program
Programming by means of switching sides
This product is suitable in use for domestic, commercial and industrial installations.
Available with or without power reserve
24hours dial with 15mins segments
Switching status indication

Electrical
	RLS1	RLSB1(Power reserve)	RLS2	RLSB2(Power reserve)
Rated voltage Rated frequency Power consumption Switching contact Contact capacity Contact resistance Insulation resistance Coil Voltage Power reserve Drive Program(Full time range) Minimum setting Unit Set up times	230V AC 50/60Hz 2.5VA 1NO 16A/250V AC(COS&=1) 4A/250V AC(COS&=0.6) ≤50MΩ ≥100MΩ 110/230V AC - synchronous motor day(24hours) 15 minutes 15 mins/per time 96 times	230V AC 50/60Hz 2.5VA 1NO 16A/250V AC(COS&=1) 4A/250V AC(COS&=0.6) ≤50MΩ ≥100MΩ 110/230V AC 70hours quarz-controlled motor day(24hours) 15 minutes 15 mins/per time 96 times	230V AC 50/60Hz 2.5VA 1NO+1NC 16A/250V AC ≤50MΩ ≥100MΩ 110/230V AC - synchronous motor day(24hours) 30 minutes 30 mins/per time 48 times	230V AC 50/60Hz 2.5VA 1NO+1NC 16A/250V AC ≤50MΩ ≥100MΩ 110/230V AC 150hours quarz-controlled motor day(24hours) 30 minutes 30 mins/per time 48 times

Mechanical

Frame size	45mm	45mm	45mm	45mm
Device height	90mm	90mm	90mm	90mm
Device width	17.5mm	17.5mm	52.5mm	52.5mm
Depth	60mm	60mm	60mm	60mm
Mounting	quick fastening on DIN rail IEC/EN60715
Upper and lower terminals	lift terminals	lift terminals	lift terminals	lift terminals
Terminal capacity:
one-wire	1.5-4mm2	1.5-4mm2	1.5-4mm2	1.5-4mm2
fine wire	1-2.5mm2	1-2.5mm2	1-2.5mm2	1-2.5mm2
Tightening torque of terminal screws	0.8 Nm	0.8 Nm	0.8 Nm	0.8 Nm
Perm.ambient temperature range	-10ºC ~55ºC	-10ºC ~55ºC	-40ºC ~55ºC	-40ºC ~55ºC
Electrical life	105times	105times	105times	105times
Mechanical life	107times	107times	107times	107times
Flame class acc.to En60730	D	D	D	D
Sealable	Yes	Yes	Yes	Yes